Filter
Top Products
12
OPERATING YOUR BREVILLE MILK CAFÉ™
NOTE
Never operate the appliance without
the minimum level of liquid in the jug.
The appliance will automatically turn
off if jug is empty. Wait for appliance to
cool down before re-use.
5. Place the jug correctly onto the power
base, ensuring the jug is dry and clean.
6. Turn the START | STOP dial to the
desired temperature. When frothing
milk for a cappuccino or latte, we
recommend staying within the
‘OPTIMUM MILK TEMP’ range,
however this is up to your personal
preference.
If temperature setting is changed whilst
in operation, the appliance will stop at
the new temperature selected.
7. Press the START | STOP button to
commence frothing. The button surround
will start flashing.
NOTE
Do not remove jug during operation.
To stop operation at any time, press
the START | STOP button once.
8. When liquid has reached set
temperature, the appliance will stop.
This will take anywhere between
2 -7 minutes depending on the quantity
of milk used.
Carefully remove the jug from the power
base as the jug and contents will be hot.
Always remove the jug using the jug
handle. Do not place the jug on a table,
plastic surface or heat sensitive surface
which may scorch or melt. Remove the
jug lid and pour the frothed milk.
NOTE
The frothing disc will be hot after
operation. Wait for jug to cool before
removing disc.
WARNING
Surface of the jug will be hot during
and after operation. Do not place hot
jug on heat sensitive surface
WARNING
Do not place hot jug onto power cord.
NOTE
The milk frother has been designed
specifically for the purpose of
foaming milk and other dairy milk
alternatives and is not intended to
whip, thicken or heat other food
substances eg. cream, custard, soup,
gravy etc.
The milk frother is not designed
to mix a large quantity of dry
ingredients or melt large food pieces
eg. cubed chocolate, ground nuts,
whole spices or fresh herbs.