Bushnell 119937 Digital Camera User Manual


 
14
GLOSSARY
PIR—Passive Infrared Sensor. Senses motion like typical security motion detector. Requires infrared energy (heat) in addition
to motion to trip sensor to assure detection of live animals.
Event—Any time that the PIR senses motion it counts it as an event. Events are recorded to the SD card in a text le. Events
are recorded continuously during operation.
Image—A digital picture recorded on the SD Card when motion is sensed. Images are taken at the desired delay between im-
ages.
Image Delay—Time elapsed between photos while events are sensed and recorded. is is user-set based on wildlife activity
in area.
IR Flash—IR LED Array—Infrared LED Night Vision feature. Emits a burst of infrared light which is invisible to the human
eye. Especially useful for night photos when a visible ash is undesirable. (Featured on Models 119937/119907 only)
Std (Standard) Flash—Xenon ash tube used for low light or night photography. Automatically res if necessary due to dark,
overcast skies or waning light late in the day.
SD Card—Memory card used to store images and events. Trail Scouts are compatible with up to 1GB capacity SD cards,
standard or high speed (all new Trail Scouts include an SD card).
Battery Life—Time that camera will function in the eld. Dependent on temperature, number of images and number of ashes
during that time.
Setup—Using the display menu and buttons to set the date/time, still photo or movies, and password.
Security—One of the most important requirements of any trail camera. e Trail Scouts have 4 security features—padlock tab,
tree bracket, cable lock, and soware password.
Trigger Speed—Time delay between a subject passing in front of PIR sensor and the image capture of that subject.
All Bushnell Trail Cameras have a trigger speed of less than one second.
Trail Scout 2008 Models 119835+114 14 3/4/08 12:05:28 AM