Filter
Top Products
8
SETUP GUIDE
NOTE (Models 119937/119907 Only) : THE LASER POINTER IS ACTIVATED IN THE SET- UP MODE. DO NOT PERMIT
THE LASER POINTER TO BE DIRECTED TOWARD ANYONE’S EYES, TO AVOID POTENTIAL EYE INJURY.
1. K1 - Mode Switch (OFF / SETUP/ ON) :
a) Power ON (UP position): Set K1 to ON position, e LCD display will show “BUSHNELL”
for about 2 seconds.
e LCD will rotate through the DATE\TIME\EVENT&IMAGE displays
when pressing the Up and Down keys.
EVENT nn
IMAGE nn
For mounting directions, please refer to the manual section titled “Using e Trail Scout” .
Before beginning the setup, insert 4 “D” size alkaline batteries as indicated
inside the battery compartment. If you will be using the optional solar
panel accessory, be sure to use rechargeable NiMh batteries only.
b) SETUP Mode [move switch K1 from UP (ON) position to center position]:
Press Up or Down buttons to scroll through choices of DATE, TIME, NAME,PASSWORD, etc to
modify or set these functions. Refer to the next three pages for more details.
c) Power OFF: Set K1 to “O”, the Trail Scout will be OFF.
Trail Scout 2008 Models 119835+18 8 3/4/08 12:05:27 AM