Filter
Top Products
When the LCD shows [Password Set], press the ENTER key to set the password.
The LCD will show [Password Yes]. To change the password, press Enter.
If you do not want to set a password, you can press the Up or Down key to select NO.
If you selected YES, the LCD shows [New Pswd]. Press the Up or Down key to select
the first password digit of 0-9. Press ENTER to confirm, the cursor will move to the
next digit to the right. Repeat the process using UP, Down and Enter keys to enter
your four digit password. Press ENTER to confirm.
If you do not want to set a password when the LCD shows (PW YES) , you can press
the U/D button to select No, After pressing the ENTER, the LCD display shows (PW
NO), and no password will be set.
(4) SET PASSWORD:
New Pswd
0 0 0 0
Password
Set
Password
None
Password
Yes
When you are finished with SETUP, change K1 to the ON (UP) position and the
unit will be operating after a 5 minute delay.
c) Power OFF: Set K1 to “Off”, the Trail Scout will be OFF.
b) SETUP Mode [move switch K1 from UP (ON) position to center position]:
Press Up or Down buttons to scroll through choices of DATE, TIME, NAME and PASSWORD
to modify or set these functions.
(1) SET DATE: When the LCD shows the date, press the ENTER key to modify the date.
Press Up or Down button to select 1-12 then press the ENTER button to confirm
the two digit month. The cursor will then move to the day.
Press Up or Down button to select 1-31 then press ENTER to confirm the two
digit day. Then the cursor will move to the year.
Press Up or Down button to select 0-99,then press ENTER to confirm the two
digit year. From Set Date, press the Down button to set the time.
(2) SET TIME: When the LCD shows the time, press the ENTER key to modify the time.
Press Up or Down button to select 1-12, then press ENTER to confirm the two
digit hour. Then the cursor will move to the minute.
Press Up or Down button to select 0-59, then press ENTER to confirm the two
digit minute. From SET TIME, press the Down button to set the name.
(3) SET NAME: When the LCD shows current name, press ENTER key to modify the
name display. Press Up or Down button to select one character from “A” to “Z”,
“0” to “9”, ”_” , then Press ENTER to confirm, the cursor will move to next character.
There are 2 lines of 8 characters each for your use. From Set Name, press the Down
button to change the password.
Set Date
09/18/04
Set Time
06: 30 PM
MY NAME
555_1234
8
9
Trail Scout 6LIM.indd 10-11 1/25/05 4:25:48 PM