Califone DC596 Digital Camera User Manual


 
visit us online at califone.com
20 DiggiDitto™ DC596—Smart Camera with Image Recognition
visit us online at califone.com
DiggiDitto™ DC596—Smart Camera with Image Recognition 21
The Main Toolbar in the Camera tab has the following buttons:
Print Prints the image displayed on the
screen via the default printer. When a
moving image is displayed on-screen,
the computer freezes the frame and
sends it over to the printer. However,
when the window is split, or when the
image is rotated, the original image (not
the split or rotated image) is printed.
Split Screen Splits the screen in two, showing the
captured image on the left and the
original image on the right. This is a
good mode to compare one image to
another.
Focus Automatically refocuses the image.
Freeze/
Release Frame
To freeze the movement in front of
the camera. This can also be done by
pressing the F5 key.
Capture To create a still image and make
corrections i.e., crop, ip, sharpen,
brighten, etc.
Record Movie To make a simple movie clip of 10
minutes or less. When going to the
movie recording screen, the resolution
changes to 640 × 480. For a smaller
footprint, try going down to 320 × 240.
Enlarge Zoom-in functionality. May also press
the “+” key.
Shrink Zoom-out functionality. May also press
the “-“ key.
Rotate
Clockwise 90
o
Rotates the image 90 degrees to the
right.
Pen To write on-screen as you would on a
blackboard.
Full Screen: Enlarges the screen to t the monitor.
Pressing <Ctrl-Enter> does the same.
Press it again to restore it to the
original size.
Lock/Unlock Locks the toolbar. Notice that the Lock
icon is grayed out when rst launched;
it becomes golden (active) when the
screen is enlarged to t the monitor.
Click it to unlock the toolbar so as
to hide the toolbar when moving the
mouse pointer away from the toolbar.
Top/Bottom
Icon
Changes the position of the toolbar,
from the top of the screen to the
bottom. The toolbar cannot move
sideways. (shortcut: Ctrl-M)