Filter
Top Products
6.
Applications
Even with a wireless multi
-
flash system, you can use high
-
speed sync
(FP
flash), FE lock, and flash exposure compensation in the same way
as with
a camera
-
attached 650EX.
Wireless high
-
speed sync
(FP
flash)
-
Wireless FE lock
After setting the wireless single
-
After setting the wireless single-
or multi
-
flash setup, just set the or multi
-
flash setup, just press
ST-E2's high
-
speed sync button to the camera's
<
FEL
>
button to
<
5~
>.
This enables wireless high
-
enable wireless
FE
lock.
speed sync. The slaves need not
be touched
at
all.
\I/
39:
The ST-E2 can transmit wireless signals only toward the front. Therefore,
the slaves cannot be positioned behind the camera. Otherwise, they will
not be able to pick up the
ST-E2's wireless control signals. However, with
Off
-
Camera Shoe Cord
2
(sold separately), the ST-E2 can be positioned
away from the camera and face any direction for wireless transmission.
Flash exposure compensation
Flash
exposure
compensation
can be set with the camera.
Wlrelchs manual flash
Wireless manual flash can be
fired
by settlng the slave to
single-slave
-
or manual flash
Wlreless
repeating
flash
Wireless repeating flash can be
used when the slave has been set to
slngle-slave or repeat~ng flash
For
detalls, see the 5.50EXts
Instruct~ons
COPY