Filter
Top Products
2.
Readying
the
ST
-
E2
(I)
Installing the Battery
Use one lithium 2CR5 battery
(sold separately).
1
Slide the battery compartment
cover as shown by the arrow
and remove.
Install the battery in the orien
-
tation shown in the compart
-
ment.
Install the battery compart
-
ment cover to close the battery
compartment.
About the battery
If
the battery contacts are
soiled, improper electrical con
-
tact may result. Before
installing the battery, wipe the
battery contacts with a clean
cloth.
When to replace the battery
Replace the battery if it takes
30
sec. or longer for the red pilot
lamp to light after you set the
main switch to
<
I
>
or
<
HOLD
>.
(2)
Attachment to the
Camera
Push in the ST-E2's mounting
1
foot all the way into the camer
-
a's hot shoe.
Slide the shoe lock slider as
shown by the arrow.
(The lock
pin protrudes to lock
the
ST
-
E2 onto the camera.)
To remove the
ST-152,
slide the
shoe lock slider
in
the opposite
direction (the
lock pin retracts)
and
slide off the
ST
-
EP.
COPY