Filter
Top Products
154
If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
Turn off the camera.
Insert the coupler.
∆Open the cover (p. 17) and insert the
coupler as shown until it locks into place
with a click.
∆Close the cover (p. 17).
Plug the cord into the coupler.
∆Open the cover and fully insert the plug
into the coupler.
Connect the power cord.
∆Connect the power cord to the compact
power adapter, then plug the other end into
a power outlet.
∆You can turn the camera on to use it.
∆After you finish, turn off the camera and
unplug the power cord from the power
outlet.
Using Household Power
Terminals
Do not unplug the plug or power cord with the camera turned on. This
could erase images you have taken or damage the camera.