Filter
Top Products
Troubleshooting
158
Even when you press the shutter button halfway, the AF frame does not
appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and push the shutter
button halfway, or repeatedly push the shutter button halfway, the frame will appear
and the camera will focus.
Subject is too dark.
• Set the flash to h (p. 71).
• Adjust the brightness with exposure compensation (p. 71).
• Adjust the image with i-Contrast (pp. 92, 131).
• Use the AE lock, or spot metering to shoot (pp. 87, 88).
Subject is too bright (overexposed).
• Set the flash to ! (p. 64).
• Adjust the brightness with exposure compensation (p. 71).
• Use the AE lock, or spot metering to shoot (pp. 87, 88).
• Reduce the light illuminating the subject.
Image is dark even though the flash fired (p. 26).
• Increase the ISO speed (p. 75).
• Shoot within an appropriate distance for flash photography (p. 71).
Image taken using the flash is too bright (overexposed).
• Shoot within an appropriate distance for flash photography (p. 71).
• Set the flash to ! (p. 64).
White dots appear on the image when shooting with the flash.
• Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 75).
• Depending on the Shooting mode, when shooting in a high ISO speed the image may
appear rough or grainy (pp. 56, 75).
Eyes appear red (p. 93).
•
Set the [Red-Eye Lamp] to [On] (p. 148). When shooting with the flash, the lamp (on the
front of the camera) lights (p. 42), and for approximately 1 second while the camera is
reducing red-eye, it is not possible to shoot. It is more effective if the subject is looking
directly at the lamp. Even better results can be obtained by increasing the lighting in
indoor settings or approaching closer to the subject.
Recording images to the memory card takes a long time, or continuous
shooting slows down.
• Perform a low-level format of the memory card in the camera (p. 51).
You cannot make settings for shooting functions or in the FUNC. menu.
• The items in which settings can be made differ depending on the shooting mode
(pp. 164 – 167).