Filter
Top Products
Turning
on
the Power Switch
Set the power switch to <ON>.
b
The flash recycl~ng starts
Check that the flash is ready.
o
When the pllot lamp l~ghts In red, the
flash
IS
ready to fire (fully charged).
s
To fire a test flash, press the
<PILOT>
button
About Auto Power Off
To save battery power, the power will turn off automatically after a
certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the
Speedlite again, press the camera's shutter button halfway. Or press
the Speedlite's
<PILOT>
button.
@
9,
A
test firing cannot be fired while the camera's operation timer
64
or
66
is active.
ar
The Speedlite's settings will be retained in memory even after the power
is turned off. To retain the Speedlite's settings after you replace the
batteries, turn off the power and replace the batteries within
1
minute.