Canon 430EX II Camera Flash User Manual


 
ZOOM
:
Setting the Flash Coverage
and
Using the Wide Panel
ma
The flash coverage can be set to match the lens focal length from
24mm to
105mm. The flash coverage can be set automatically or
manually. Also, with the built-in wide panel, the flash coverage will be
compatible with ultra wide-angle lenses as short as
14mm.
"
Press the
<ZOOM/=>
button.
r
Press the
<@>
button to change the
flash coverage.
r
If
is not displayed, the flash
coverage will be set automatically.
a
If you set the flash coverage manually, make sure it covers the lens focal
length so that the picture will not have a dark periphery.
Using the Wide Panel
a
s
The flash coverage will not be compatible with the EF15mm f12.8
Fisheye lens.
For the effective lens focal length (or crop factor). refer to the camera's
instruction manual.
~
l
0
.
If you use bounce flash with the wide panel in place, the entire display on
the
LCD
panel will blink as a warning. Since the subject will be
illuminated by both the bounce flash and direct flash, it will look
unnatural.
a
Pull out the wide panel gently. Using excessive force may detach the
wide panel.
18
Pull out the wide panel and place it as
shown.
e
The
<ZOOM/;q>
button will not
work.