Filter
Top Products
Bounce
Flash
By pointing the flash head toward a wall or ceiling, the flash will bounce
off the surface before illuminating the subject. This can soften shadows
behind the subject for a more natural-looking shot. This is called bounce
flash.
Set the Bounce Direction
r
Hold down the
<PUSH>
button and turn the flash head.
u
If the flash coverage is set automatically, the flash coverage will be
fixed to
50rnrn.
The
LCD
panel will also display
<Zoom
-
-mm>.
a
You can also set the flash coverage manually. (p.18)
0
.
If
the wall or ceiling is too far away, the bounced flash might be too weak
and result in underexposure.
0
The wall or ceiling should be a plain, white color for high reflectance.
If
the bounce surface is not white, a color cast may result in the picture.
a
After you take the shot, if the flash exposure confirmation lamp does not
light, use a larger aperture opening and try again. With a digital camera,
you can also increase the
IS0 speed.
17