Filter
Top Products
About Slave Group Control
--
-
1
Slave
group
A
For example, ~f you have the slave ID set
I
/----
to
<A>
for three slave un~ts, all three
slave
un~ts will be controlled as ~f they
were one
Speedl~te In slave group
A
Setting Manual Flash with the Slave Unit
-
Manual flash can be set manually with the slave unit. Do this in the
following cases:
(1) When you want to set the flash output with the slave units
individually for wireless or manual flash, as with studio flash units.
(2) When you use Speedlite Transmitter
ST-E2
for wireless or manual
flash.
s
Hold down the
<MODE>
button for2
sec. or more.
b
<M>
will bl~nk.
+.
Set the manual flash output. (p.19)