Filter
Top Products
Changing Shooting Function Settings
158
You can change the way the image displays right after shooting.
z Choose [Review Info], then press the qr
buttons to choose an option.
You can display grid lines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for 3.5" x 5" and postcard size prints.
z Choose [Disp. Overlay], then press the qr
buttons to choose an option.
Changing the Way the Image Displays Right
After Shooting
Off Displays the image only.
Detailed
Displays detailed information
(p. 176).
Focus Check
The area inside the AF frame is
magnified, allowing you to check
the focus. The procedure is the
same as in “Checking the Focus”
(p. 116).
Displaying the Overlay
Off –
Grid Lines A grid overlays the screen.
3:2 Guide
Gray bars appear on the top and
bottom of the screen. This area
will not print when printing on
paper with a 3:2 aspect ratio.
Both
Both grid lines, and the 3:2 guide
appear.
• In , you cannot set [3:2 Guide] or [Both].
• Grid lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
COPY