Filter
Top Products
Using the Self-Timer
53
The camera will shoot approximately 2 seconds after the shutter button is pressed,
preventing any camera shake that occurs when pressing the shutter button.
Choose [.
z Follow Step 1 on p. 52 to choose [.
XOnce set, [ will appear on the screen.
z Follow Step 2 on p. 52 to shoot.
You can set the delay (0 – 30 seconds) and the number of shots (1 – 10 shots).
Choose $.
z Follow Step 1 on p. 52 to choose $, then
press the n button immediately.
Choose the settings.
z Press the op buttons to choose [Delay]
or [Shots].
z Press the qr buttons or turn the
5
dial to
choose a value, then press the
m
button.
XOnce set, $ will appear on the screen.
z Follow Step 2 on p. 52 to shoot.
Using the Self-Timer to Prevent Camera Shake
Customizing the Self-Timer
• When 2 or more shots are set, the exposure and white balance settings
are set with the first shot. If the flash fires or you set a high number of
shots, the shooting interval may take longer than usual. Shooting will stop
automatically if the memory card fills.
• When you set the delay for more than 2 seconds, the lamp and self-timer
sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).
COPY