Filter
Top Products
Adjusting the Flash Exposure Compensation
90
XThe flash will fire and when appears,
the flash output will be retained.
z If you release your finger from the shutter
button and press the b button again,
will disappear and FE will unlock.
Compose the scene and shoot.
z When you shoot one image, will
disappear and FE will unlock.
Just as with exposure compensation (p. 75), you can adjust the exposure
from –2 to +2 stops in 1/3-stop increments when using the flash.
Choose X.
z After pressing the m button, press the
op buttons to choose X.
Choose the amount of flash
exposure compensation.
z Press the qr buttons or turn the 5 dial to
choose the amount of flash exposure
compensation, then press the m button.
XOnce set, X will appear on the screen.
Adjusting the Flash Exposure
Compensation
Safety FE
The camera automatically changes the shutter speed or aperture value when the flash
fires to avoid overexposing and blowing out the highlights in the scene. However, if you
press the n button to display the 4 tab and set [Safety FE] in [Flash Settings] to
[Off], the shutter speed and aperture value will not automatically adjust.
• You can also set the flash exposure compensation by pressing the
n button to choose [Flash Settings] (p. 92) in the 4 tab, then
choose [Flash Exp. Comp] and press the qr buttons to choose a setting.
• If you press the r button and immediately press the n button when
the flash is raised, the settings screen will appear.
COPY