Filter
Top Products
162
Using the separately sold Stereo Video Cable STV-250N (p. 193), you can
connect the camera to a TV to view images you have shot.
Turn off the camera and TV.
Connect the camera to the TV.
z Open the camera’s terminal cover and fully
insert the cable plug into the camera’s
terminal.
z Insert the cable plug fully into the video
input terminals as shown in the illustration.
Turn on the TV and switch it to the
input the cable is connected to.
Turn on the camera.
z Press the 1 button to turn on the camera.
XThe image will appear on the TV (nothing
will appear on the screen of the camera).
z After you finish, turn off the camera and
TV, and unplug the cable.
You can use a TV to display the camera screen content while shooting.
• To connect the camera to a TV, follow the Steps above.
• Shooting procedures are the same as when using the camera screen.
Viewing Images on a TV
Yellow
White
White
Yellow
Red
Red
What if the images don’t display correctly on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the n button and choose [Video
System] in the 3 tab to switch to the correct video system.
Shooting Using a TV as the Display
COPY