Filter
Top Products
15
You can take three flash shots while automatically changing the flash
output for each shot up to ±3 stops in 1/3-stop increments (1/2-stop
increments if the camera enables only 1/2-stop increments). This is
called FEB (Flash Exposure Bracketing).
1
Select <g>.
Press the <8> button so that <g>
is displayed.
X The <g> icon and bracketing
amount will blink.
2
Set the flash exposure bracketing
amount.
Turn the <9> dial to set the amount.
3
Press the <8> button.
X FEB will be set.
You can prevent the FEB from being cancelled automatically after the
three shots are taken. (C.Fn-03 → p.27)
The FEB shooting sequence can be changed. (C.Fn-04 → p.27)
g
FEB
After the three shots are taken, FEB will be cancelled automatically.
For FEB, set the camera’s drive mode to single shooting. Be sure the
flash is ready before shooting.
You can also combine FEB with flash exposure compensation and FE
lock.
A65_02.fm Page 15 Thursday, November 23, 2006 1:27 PM