Filter
Top Products
36
You can switch between normal flash and wireless flash. For normal
shooting, be sure to set the wireless setting to OFF.
1
Press the <H> button for 2
sec. or longer until the display
blinks as shown on the left.
2
Set it as the master unit.
Turn the <
9
> dial until <
M
>
blinks, then press the <
8
> button.
X <M> and <w> will be
displayed, and the Speedlite is set as
the master unit.
Set it as a slave unit.
Do the “Master Unit Setting”
procedure above. For step 2, turn the
<9> dial
until
<x> blinks,
then press the <8> button.
X <x> and <w> will be
displayed, and the Speedlite is set as
a slave unit.
Wireless Settings
Master Unit Setting
Slave Unit Setting
A65_03.fm Page 36 Thursday, November 23, 2006 1:27 PM