Filter
Top Products
31
3
Set the Speedlite to the camera’s
aperture setting.
Press the <8> button so the
aperture setting blinks.
Turn the <9> dial to set the
aperture, then press the <8> button.
After completing the settings, press the
shutter button halfway. The effective flash
range will be displayed on the Speedlite’s
LCD panel.
With manual external metering, you can connect the camera to the
Speedlite’s PC terminal with a sync cord and place the Speedlite at a
different position from the camera.
You cannot connect a Speedlite to another Speedlite’s PC terminal with
a sync cord. The second Speedlite will not fire.
A65_02.fm Page 31 Thursday, November 23, 2006 1:27 PM