Filter
Top Products
Specific Scenes
100
Join the subjects in the shooting
area and look at the camera.
XAfter the camera detects a new face, the
lamp blinking and self-timer sound will speed
up. (When the flash fires, the lamp will remain
lit.) About two seconds later, the camera will
shoot.
z To cancel shooting after you have triggered
the self-timer, press the n button.
You can shoot up to 10 shots in rapid succession by holding the shutter button
all the way down. For details on the continuous shooting speed, see
“Specifications” in the Getting Started guide.
HQ: High Quality
Choose .
z Follow steps 1 – 2 on p. 93 and choose .
Shoot.
XHold the shutter button all the way down to
shoot continuously.
z Shooting stops when you release the shutter
button or reach the maximum number of
shots, after which [Busy] is displayed and the
shots are shown in the order you took them.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the op buttons after choosing in
step 1. [Blink Detection] (p. 86) is only available for the final shot.
High-Speed Continuous Shooting (High-speed
Burst HQ)
Still Images
COPY