Filter
Top Products
Sequential AE lock photography
When shooting continuously with AE lock in the same lighting conditions, it is not necessary to meter the
subject for each shot provided you keep pressing the shutter button halfway after each exposure.
6. Exposure Compensation
Use exposure compensation for high-key (intentionally overexposed) or low-key (intentionally underexposed)
shots. The range of exposure compensation is up to _5 steps in 1/2-step increments.
· "+" means increasing exposure while "--" means decreasing exposure.
· Exposure compensation can be used regardless of the metering or shooting mode, except when the main
switch is set to the full auto position ( O )
1) Press the exposure compensation button and "0.0+-" appears in
the display panel.
2) While pressing the exposure compensation button, turn the
electronic input dial to the desired exposure compensation value.
3) Remove your finger from the exposure compensation button.
· The"+/-"mark indicating exposure compensation status appears in
the viewfinder and in the display panel.
· Reset the amount of compensation to "0.0_" otherwise,
subsequent frames will be incorrectly exposed.