Filter
Top Products
2) Open the switch cover on the back of the camera and press the battery check
button(
). Battery power shows in the display panel.
4. Loading the Film
1) To open the back cover, push the back cover latch down while pressing the back cover lock button
2) Insert the upper-flat end of the film cartridge into the film chamber first. The film-load check mark (OIL)
appears in the display panel.
3) Pull the film leader across the shutter curtain until its tip is aligned with the orange index.
CAUTION
* Before loading the first roll of film, remove the plastic insert.
* NEVER touch the shutter curtain. Its high-precision design makes it sensitive to
pressure. Also, when loading the film be careful that the film leader does not touch
the shutter curtain.