Filter
Top Products
magnification at infinity with a standard 50mm lens.
Dioptric
Adjustment:
Built-in eyepiece is adjusted to standard --1 diopter. (eyepoint: 19.3mm)
Focusing Screen:
Overall new laser-matte/AF frame. Six types of interchangeable screens are available optionally.
Mirror: Quick-return half-mirror with shock and noise absorber.
Viewfinder Information:
Displayed at the bottom of the viewing area. (1) 7-segment LCD digit and character display
1. Shutter speed--flashes at 2Hz to give out-of-metering range warning.
2. Aperture value--flashes at 2Hz to give out-of-metering range warning.
3. Metered manual exposure level--OP, oo, CL
4. Depth of field AE (EOS 650 only) --dEP 1, dEP 2
(2) LCD mask character display
1. *--AE lock indicator in partial metering mode.
2. M--Manual exposure indicator
3.
-flash charge completion indicator
4. +/ - -exposure compensation indicator
5. 0--AF in-focus indicator (flashes at 8Hz when AF is not possible.)
Light Metering
System:
TTL full aperture metering using SPC. Two selectable metering patterns: evaluative metering and partial
metering (approx. 6.5% of the picture area). Stopped-down metering is not possible.
Exposure Modes:
1. Shutter-Priority AE
2. Aperture-Priority AE
3. Intelligent Program AE
4. Program Shift Function (EOS 620 only)
5. Depth of Field AE (EOS 650 only)
6. Manual
7. Flash AE (A-TTL program flash AE and TTL program flash AE with specified Canon Speedlites)
Camera-shake Warning:
Operates for program AE, aperture-priority AE, and the EOS 650's depth of field AE modes. When automatically
set shutter speed falls 0 to 0.5 steps below 1/focal length of the lens in use, the electronic beeper sounds.
Beeper can also be turned on and off.
Metering Coupling Range:
EV 1 - 20 (EV -1 to 20 in normal temperature) with 50mm V1.4 at ISO 100 or equivalent.
Film Speed:
ISO 25 - 5000 is automatically set by 1/3 step according to DX code standard. ISO 6 - 6400 can also be set
manually.
Exposure Compensation:
+5 steps by 1/2-step increment
Auto Exposure Bracketing (EOS 620 Only)
+5 steps in 1/2-step increments. Three continuous exposures are taken in sequence of underexposure, correct
exposure according to camera's meter and overexposure.
Multiple Exposures (EOS 620 Only):
Presetting up to nine exposures is possible. Automatically cleared upon completion.
AF Control System:
TTL-SIR (TTL secondary imaged registration) phase-detection type using BASIS (base- stored image sensor). AF
operation starts when the shutter button is pressed halfway. AF in-focus indicator lights upon ranging
completion. Audible indicator (electronic beeper) can be turned on and off.