Filter
Top Products
111
E
Additional
Information
Memory Card Related Messages
Message Explanation
NO CARD Memory card not is inserted into the camcorder.
81
THE CARD IS SET FOR
ERASURE PREVENTION
SD Memory Card is set for erasure prevention. Replace the card
or change the position of the protect switch.
81
NO IMAGES No images are recorded on the memory card. –
CARD ERROR A memory card error occurred. The camcorder cannot record or
play back the image.
The error may be temporary. If the message disappears after 4
seconds and “ ” flashes red, turn the camcorder off, remove
the card and reinsert the card. If “ ” changes to green, you can
continue recording/playback.
–
CARD FULL No remaining capacity on the memory card. Replace with another
card or erase images.
–
NAMING ERROR File or folder number has reached the maximum value.
84
UNIDENTIFIABLE
IMAGE
Image is not recorded with JPEG compression, or with a
compression not compatible with the camcorder, or the image file
is corrupted.
–
TRANSFER
ORDER ERROR
You attempted to set more than 998 transfer orders.
106
CANNOT TRANSFER! You attempted to transfer a movie file as wallpaper.
105
THIS IMAGE CANNOT
BE RECORDED
Some analog images cannot be recorded on the memory card
depending on the signal.
–
TOO MANY STILL
IMAGES DISCONNECT
USB CABLE
Disconnect the USB cable and decrease the number of still
images on the memory card to less than 1800. If a dialog
appeared on the computer screen, close it. Reconnect the USB
cable.
–