Filter
Top Products
75
E
Editing
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all the devices before starting the connections. Unload the tape from the
camcorder. Refer also to the instruction manual of the connected device. Use the optional
CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable.
R
L
Signal flow
DV cable (optional)
Signal flow
STV-250N Stereo Video
Cable (supplied)