Filter
Top Products
90
Recording from Other Video Devices
You can record as movies on the memory card scenes captured from external video
devices connected through the DV terminal. only: you can also use the analog
to digital conversion to input video through the AV terminal.
For connecting instructions, refer to pages 32 and 70.
1. Set the camcorder to mode.
• If a cassette is loaded, make sure the tape is stopped.
• When recording via the AV terminal, make sure that “AV DV” is
displayed on the screen. When recording via the DV terminal, make sure that
“AV DV” is not displayed. Change the setting as necessary (
76).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the start/stop button when the scene you wish to record
appears.
4. Press the start/stop button to stop recording.
When recording from a tape in the camcorder or other video devices:
A movie recorded from an image in widescreen mode will be vertically
compressed.
The data code of the movie will reflect the date and time it has been recorded
on the memory card.
Recording stops at blank sections or recordings in different audio mode (12bit/
16bit).
Screen Displays during Movie Recording
Card Access Display
“ ” appears and “ ” moves to
indicate that the camcorder is writing on
the memory card.
Movie recording time
Indicates the recording time of the
movie.
Image Size
Indicates the movie size.
Remaining Card Capacity for
Movies
Indicates the remaining time in hours
and minutes. At less than 1 minute, the
remaining time will be displayed in 10
second-steps, at less than 10 seconds
in 1 second-steps.
• The indication varies depending on
the recording condition. The actual
remaining time may be longer or
shorter than indicated.