Canon A1400 Digital Camera User Manual


  Open as PDF
of 124
 
63
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
[!] Off
Youcanpreparethecameraforshootingwithouttheash.
•Ifaashing[ ] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
Still Images
Shooting with the FE Lock
Just as with the AE lock (=
55),youcanlocktheexposurefortheash
shots.
1 Settheashto[h] (=
62).
2 Locktheashexposure.
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<r> button.
Theashres,andwhen[(] is
displayed,theashoutputlevelis
retained.
To unlock FE, release the shutter button
and press the <r> button again. In this
case, [(] is no longer displayed.
3 Compose the shot and shoot.
•FE: Flash Exposure
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1 Congurethesetting.
Press the <q> button, and then press the
<q><r> buttons to choose [
].
[ ] is now shown on the shooting
screen (=
109).
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2 Shoot.
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
To restore the original setting, choose
[
] in step 1.
 previous next