Filter
Top Products
50
Shooting – The Basics
Shooting
Images can be shot in the following 2
sequences in Stitch Assist mode.
1
Turn the Shooting mode dial to
.
z The LCD monitor will turn on.
2
Select the
shooting
sequence using
the left or right
button and press
the SET button.
z The shooting sequence is set.
z You can also press the shutter button directly
to shoot without pressing the SET button.
Left Right Left to right horizontally
Left Right Right to left horizontally
z For good results, pan (swivel) the
camera to take successive shots.
z To shoot close-ups, slide the camera
over the subject, keeping it parallel to
the subject as you move it.
3
Shoot the first image.
z The exposure and white balance settings are
set and locked with the first image.
4
Compose and
shoot the second
image so that it
overlaps the first.
z Minor discrepancies in
the overlap can be
corrected with the
software.
z An image can be retaken. Press the left or
right button to return to that frame.
5
Use the same procedures to
shoot the remaining frames.
z A maximum of 26 images can be recorded.
6
Press the SET button after the
last shot.
Sequence