Filter
Top Products
91
Shooting – Advanced Functions
Advanced Functions
Adjusting the Flash Output
In mode, the flash output can be controlled
in three steps when shooting.
1
Select (Flash
Output) in the
FUNC. menu.
z See Selecting Menus
and Settings (p. 66).
2
Adjust the flash output using the
left or right button.
z You can shoot the image right after selecting
settings by pressing the shutter button. The
menu will reappear after the shot, allowing
you to change the settings easily.
3
Press the FUNC. button.
Mode Dial
When the flash output is low, less shadow
appears in the image. However, when
shooting a wide scene or area, the image
will likely be darker due to insufficient light.
When adjusting the flash output, consider
all the shooting conditions, including the
distance to the subject.