Filter
Top Products
Troubleshooting Guide
129
The shutter
does not
release.
The film does
not rewind
automatically.
“” blinks on
the LCD panel.
Problem Probable Cause Solution Page
The film has not been loaded
properly. (< > blinks on
the LCD panel.)
Rewound film is still in the
camera. (The < > icon is
blinking.)
Focus has not been
achieved. (The in-focus
indicator in the viewfinder is
blinking.)
The temperature is cold.
Custom Function CF-1 has
been set to 1 or 3.
Battery power is very low.
A misoperation has occurred
with the camera, lens, or
flash unit.
Load the film correctly.
Replace the film with a new roll.
Press the shutter button halfway
again and focus again. If the
camera still cannot focus, see
“Manual Focusing “ on page 52.
Cold temperatures can quickly
degrade battery performance.
Replace with a new battery.
Set Custom Function CF-1 to 0 or
2.
Replace the battery with a new
one.
Remove and reload the battery. If
“” turns off, camera operation
will be normal.
•If “ ” still continues to blink,
the camera, lens, or flash unit is
faulty. Take the camera and any
attached lens and flash unit to
your nearest Canon Service
Center.
24
25
24
28
17
30
52
8
21
28
104
7
21
7
21
Back
cover
09. C836-E (127~) 28-01-2003 13:03 Pagina 129