Filter
Top Products
10. buLb Exposures
When bulb is set, the film is exposed during the time you keep pressing
the shutter button completely. Bulb is useful when a long exposure is
necessary for capturing night scenes, fireworks, and the night sky.
While pressing the < >
button, turn the < > dial until
is displayed.
Release the < > button.
Set the < > switch to < >.
Turn the < > (or < >) dial to
set the desired aperture.
Press and hold down the shutter
button completely for the duration
of the exposure.
84
1
2
3
4
5
• When the bulb exposure starts, the frame counter on the LCD panel counts the
elapsed exposure time from 1 to 30 seconds. After every 30 seconds, one
segment ( ) on the exposure compensation scale appears and the frame
counter resets to 1. Therefore, if three segments are displayed and the frame
counter reads “30,” it means 120 seconds have elapsed.
• Bulb exposures consume almost no battery power.
• To connect a remote controller (Remote Switch 60T3, etc.) to the camera, use
Remote Switch Adapter RA-N3.
Connecting Remote Switch RS-80N3 (shutter release lock provided) or Timer
Remote Controller TC-80N3 (both sold separately) to the camera’s remote control
terminal relieves your finger from pressing the shutter button during bulb exposures.
06. C836-E (61~) 28-01-2003 11:49 Pagina 84