Filter
Top Products
Eye-Control Focusing
Point Selection
Set the < > switch to < >.
Look at the subject covered by the
area AF ellipse and press the
shutter button halfway.
• The selected focusing point will light and
achieve focus.
Focusing Point Selection
The focusing point selection takes
effect after 6 seconds or when the
shutter button is pressed halfway.
40
4
The focusing point selection method can be altered with the Custom Function
CF-11. See page 116.
CF
1
2
Custom Function CF-10 can prevent or limit the lighting up of the focusing point.
See page 114.
CF
Before you can accurately select a focusing point with Eye Control, calibration will be
required. For details, see “Eye-Control Calibration” on page 42 and “Eye-Control
One-Shot AF” on page 47.
When the < > button is pressed while the < > is pressed, the < > dial can
be turned to select a focusing point toward the top or bottom.
04. C836-E (33~) 28-01-2003 11:10 Pagina 40