Filter
Top Products
27
E
Mastering
the Basics
Connections for Playback on a TV Screen
You can connect the camera to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camera ( 9).
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
The DU-300 Docking Unit is fitted with microphone, headphone, S-video and
LANC m terminals. Connect it to the base of the MV4/MV4i/MV4i MC via the
docking unit attachment terminal.
Attaching the DU-300 Docking Unit
1. Make sure that the camera is switched off.
2. Align the terminals of the docking unit and the camera.
3. Push the docking unit onto the camera and turn the locking screw
clockwise to fix it securely onto the base.
• To remove, turn the locking screw anticlockwise and pull the docking unit
from the base of the camera.
LOCKING SCREW
TIGHTENLOOSEN
Attach the enclosed ferrite core before
you connect the STV-250N Stereo Video
Cable to the camera.
Attach the ferrite core to the cable about
5 cm from the plug end (the plug to be
connected to the camcorder) of the
STV-250N Stereo Video Cable.
• Pass the cable through the centre of the
core and wrap it around the core once,
then close the unit until it clicks shut.
5cm
STV-250N Stereo Video Cable
Attaching the Ferrite Core
#2_MV4/MV4 MC-i_E(06-32) 01/7/31 9:51 Page 27 (1,1)