Filter
Top Products
90
E
Editing
Do not connect/disconnect any cables to/from the camera when dubbing audio or
preparing to dub audio.
1. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
• You can use the playback buttons on the body of the camera or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camera becomes set to playback pause mode.
2. Press AUDIO DUB.
• AUDIO DUB. and appear on the display.
3. Press the PAUSE button.
• Audio dubbing starts.
• Direct your voice into the microphone.
• changes to .
4. When you get to the point where you want to stop dubbing, press
the STOP button.
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camera returns to stop mode.
• You can also set zero set memory ( 79) at the place you want to stop
audio dubbing, then every time you return to that position, audio dubbing
will cancel.
• If instead of pressing STOP you press PAUSE, the camera will return to the
playback pause mode.
REW
PLAY
FF
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
PAUSE
SLOW
+ /
– /
×2
O
FF
POWER
PLAY
P.SCAN
M
O
V
IE
REMOTE
Dubbing
PLAY
#4_MV4/MV4 MC-i_E(80-97) 01/7/31 10:32 Page 90 (1,1)