Filter
Top Products
114
High-Power Flash HF-DC1
This flash is used to supplement the camera’s built-in flash when the
subject is too far away for proper illumination. Use the following procedures
to affix the camera and High-Power Flash to the supporting bracket.
Please read the instructions accompanying the flash along with this
explanation.
Using an Externally Mounted Flash
(Sold Separately)
z The High-Power Flash will not fire in the following
situations:
- When shooting in mode
- When Flash Sync is set to [2nd-curtain]
- When Flash Adjust is set to [Manual]
zThe flash charge time will lengthen as the battery charge
gets weaker. Always set the power/mode switch to [OFF]
when you finish using the flash.
zBe careful not to touch the flash window or sensor
windows with your fingers while the flash is in use.
zThe flash may fire if another flash is being used in close
proximity.
zThe High-Power Flash may not fire outdoors in daylight or
when there are no reflective items.
zFor continuous shooting, although the flash fires for the
first shot, it does not fire for subsequent shots.
Tripod
Sockets
Bracket
(Comes with the flash)