Filter
Top Products
100
Shooting in Manual Focus Mode
The focus can be manually set.
1
Press the
button to turn on the LCD monitor.
2
Press and hold the button, then use
C or D on the multicontroller.
• The focus will lock and the icon and the MF
indicator will appear on the LCD monitor.
• When the [
(Rec.)] menu’s [MF-Point Zoom] is
set to [On], if a particular AF frame has been
manually selected, the portion of the image in
that frame will appear magnified.*
* Except in the , modes, when the digital zoom is activated
or a TV is used as the display.
* Can also be set so that the image displayed is not magnified.
• The center of the LCD monitor is magnified when the AF frame is set to
Auto Selection.
• The MF indicator shows approximate figures. Use them as a shooting
guideline only.
• Adjust the focus using C or D on the multicontroller until the image
appears focused on the LCD monitor.
• Pressing the
button a second time cancels the manual focus mode.
3
Shoot the image.
• The indicator beside the viewfinder lights yellow when the shutter button is
pressed halfway.
MF indicator
Shooting Problem Subjects for the Autofocus (continued)