Filter
Top Products
58
To obtain a good exposure of the subject, the camera sets the exposure
(shutter speed and aperture) automatically. This is called Program AE.
1
Set the Mode Dial to <d>.
2
Focus the subject.
Look through the viewfinder and aim
the selected AF point over the
subject. Then press the shutter button
halfway.
X The dot inside the AF point achieving
focus flashes briefly in red, and the
focus confirmation light <o> in the
viewfinder’s bottom right lights (with
One Shot AF + automatic AF point
selection).
X The shutter speed and aperture will
be set automatically and displayed in
the viewfinder.
3
Check the shutter speed and
aperture display.
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
4
Take the picture.
Compose the shot and press the
shutter button completely.
d: Program AE
COPY