Canon EOS REBEL T2i Film Camera User Manual


 
203
With the AC Adapter Kit ACK-E8 (sold separately), you can connect the
camera to a household power outlet and not worry about the battery
level.
1
Connect the power cord.
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
2
Connect the DC Coupler.
Connect the cord’s plug to the DC
Coupler.
3
Insert the DC Coupler.
Open the cover and insert the DC
Coupler until it locks in place.
4
Push in the DC cord.
Open the DC cord hole cover and
install the cord as shown.
Close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the camera’s power
switch is set to <
1>.
COPY