Filter
Top Products
30
Playback
Playing Back a Tape
1. Set the camcorder to PLAY (VCR)
mode.
Set the POWER switch to PLAY (VCR)
and the TAPE/CARD switch to .
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing outward.
3. Press the button to rewind the
tape.
4. Press the / button to begin
playback.
5. Press the button to stop
playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette ( 131).