Filter
Top Products
92
Transferring Using a USB Cable
Use a video editing software to transfer video recordings from the tape to the
computer, edit them and upload them from the computer to the tape. You can also
convert analog signals to digital signals and transfer them to the computer. For
details, refer to the DV Network Software Instruction Manual.
1. Install the Canon USB Video Driver supplied with the DV Network
Software.
See Installing Only the Canon USB Video Driver in the DV Network Software Instruction
Manual.
2. Connect the power adapter to the camcorder.
3. Set the camcorder to PLAY (VCR) mode.
When transferring video recordings from/to a tape, make sure that “AV \DV” is not
displayed. When using the analog-digital converter, make sure that “AV\DV” is
displayed. Change the settings as necessary ( 87).
4. Connect the camcorder to the computer using the USB cable.
Make sure that camcorder and computer are not connected with a DV cable
before connecting the camcorder to the computer using the USB cable.
Otherwise, the computer may not operate properly.
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
Windows XP/Hi-Speed USB 2.0 Only