Filter
Top Products
Changing Shooting Functions
137
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Red-Eye
Lamp], then press the qr buttons to
select [Off].
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
●
Select [Review Info], then press the
qr
buttons to select an option.
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
● Select [Disp. Overlay], then press the qr
buttons to select an option.
Detailed Displays detailed information (p. 45).
Focus
Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 108).
Grid Lines A grid overlays the display.
3:2 Guide
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Both
Both grid lines, and the 3:2 guide
will display.
COPY