Filter
Top Products
Controlling the Camera from the Wireless Controller
ENGLISH
21
Switching the Camera ON and OFF
The camera is switched on and off by using the p (camera ON/OFF) button on the wireless
controller.
To switch the camera off
With the wireless controller in range of the camera, press
the p button.
■ The image disappears and the LED on the camera turns red
(camera OFF). The camera will now respond only to the p
button or i button on the wireless controller.
To switch the camera on
In the status of camera OFF, press the p button.
■ An image appears on the monitor screen and the LED on the
camera turns green (camera ON). The camera will now respond
to all operations performed from the wireless controller.
■ Even if the camera is off, when you press the i button the
LED on the camera blinks orange and you can begin ID mode
operation (→ P.30).
MEMO
● Even if you switch the camera off, electric current will continue to flow to the
camera. However, the power of the camera will not be turned off (→ P.14).
Accordingly, even if you switch the camera off, stored preset positions, the date
and the time are not cleared.
● Whenever possible, switch the camera off when it is not in use as this reduces
power consumption. If the camera will not be used for an extended period,
unplug the AC adapter from the wall outlet. If you turn the power off, the date
and time will be cleared.
321
AF
654
MF
987
0
MENUID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W