Filter
Top Products
ID Mode
ENGLISH
31
Cancelling ID Mode
<Example> In this example, the selection made in the previous section of the cameras with ID
number 2 is cancelled. The camera LEDs are as shown below.
ID1
Orange
ID2
Green
ID3
Orange
ID2
Green
NOTE
Check the LEDs on all the adjacent connected cameras to ensure that all the
cameras are receiving the signals from the wireless controller.
1. Press the i button.
The LEDs on all the connected cameras blink orange (at 0.5-second
intervals).
ID1
Blinking orange
ID2
Blinking orange
ID2
Blinking orange
ID3
Blinking orange
To cancel ID mode operation, press the c or i button. The
LEDs on all the ID2 cameras turn green and the LEDs on the other
cameras turn orange.
2. Press the 0 button.
The LEDs on all the cameras turn green as for normal operation.
ID1
Green
ID2
Green
ID3
Green
ID2
Green
This completes ID mode cancellation. All the cameras will now respond
simultaneously to the signals from the wireless controller.
321
AF
654
MF
987
0
MENUID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W