Filter
Top Products
15
E
Preparations
Preparations
Preparing the Power Supply
Charging the Battery Pack
Disconnect the DC coupler from the power adapter before charging. Remove the terminal cover of the
battery pack.
1. Connect the power cord to the adapter.
2. Plug the power cord into a power outlet.
3. Attach the battery pack to the adapter.
• Press lightly and slide the battery pack in the
direction of the arrow until it clicks.
• The charge indicator starts flashing. The indicator
will stay on when the charging is completed.
4. When the charging is completed, remove
the battery pack from the adapter.
5. Unplug the power cord from the power
outlet and disconnect it from the adapter.
Attaching the Battery Pack
1. Turn the dial to OFF.
2. Push the OPEN switch in the direction of
the arrow to open the battery compartment
cover.
3. Insert the battery all the way into the
compartment and press gently until it
clicks.
4. Close the battery compartment cover.
To Remove the Battery
1. Turn the dial to OFF.
2. Push the OPEN switch in the direction of the arrow to open the battery
compartment cover.
3. Press the BATT.RELEASE latch left and pull out the battery.
4. Close the battery compartment cover.
Charge indicator