Filter
Top Products
43
E
Recording
In 24F (in SD) mode, the “frames” value of the time code is set in multiples of 5. When you change
the frame rate from 60i/30F to 24F, the “frames” value of the time code will automatically become a
multiple of 5.
When you mix drop frame and non-drop frame time codes (including 24F frame rate in SD mode),
there might be a discontinuity in the time code at the point where the recording starts.
When recording over existing scenes: When a time code discontinuity occurred near the recording
start point, the time code at the point where the recording starts may be discontinuous.
As long as the built-in rechargeable lithium battery is charged, the free-run time code continues to
run even if you disconnect the battery pack.