Canon zr10. Camcorder User Manual


 
22
E
Quick Overview
40×/200× digital zoom
Turn the digital zoom on by choosing D.ZOOM from the camera menu, to
magnify the camera’s zoom range by up to 20×.
Zooming
The camera’s 10× zoom lens allows you to choose the best picture angle for each
scene:
Move the zoom control towards W to zoom out to wide-angle.
Move it towards T to zoom in to telephoto.
You can also control the speed of zooming:
Move the control slightly to zoom slowly.
Move it farther to zoom more quickly. (The farther you move the zoom control,
the faster the zoom speed.)
The T and W buttons on the wireless controller adjust the picture angle, but not
the zoom speed.
10× optical zoom
TW
Zoom out
Zoom in
The zoom control continues to work as usual. You can freely zoom in and out
between 1× and 40× or 1× and 200× magnification — the camera automatically
switches between optical zooming (up to 10×) and digital zooming (10× to 40× or
10× to 200×).
When zooming, as a rule, keep at least 3 ft 3
3
/8 in (1 m) between you and your
subject. However when the zoom is at the wide-angle position, you can focus
on a subject as close as
3
/8
in (1 cm).
Image resolution is slightly lower when the magnification is greater than 10×.
When the digital zoom is set to 40×, the zoom indicator extends (light blue).
When the digital zoom is set to 200× zoom, the zoom indicator extends again (a
darker blue).
D.ZOOM••••••
40×
( 35)
2_ZR10_E(07-33) 3/10/00 18:19 Page 22 (1,1)