Filter
Top Products
Menu Options Lists
Advanced Functions
43
Warning messages, the data code (if
activated), and displays on the index
screen will appear regardless of the
setting.
All on-screen displays will appear while
the playback image is magnified or a
digital effect is activated.
[ ON], [ OFF]
When you start playing back a tape or
when the date of the recording changes,
the date and time will be displayed for 6
seconds.
[OFF], [ DATE], [ TIME],
[ DATE & TIME]
The list of available languages depends
on the region where you purchased the
camcorder.
Language Set A:
[DEUTSCH], [ENGLISH], [ESPAÑOL],
[FRANÇAIS], [ITALIANO], [POLSKI],
[ ], [ ], [ ]
Language Set B:
[ENGLISH], [ ], [ ], [ ]
[ON], [ OFF]
The demonstration mode displays the
camcorder’s main features. It starts
automatically when the camcorder is
powered with the power adapter if you
leave it turned on without loading a
recording media for more than 5 minutes.
To cancel the demo mode once it
started, press any button, turn off the
camcorder or insert a videocassette.
System Se tup (Beep, etc.)
SYSTEM SETUP
[ON], [ OFF ]
Allows the camcorder to be operated with
the wireless controller.
[HIGH VOLUME],
[ LOW VOLUME], [ OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
[ON], [ OFF]
In order to save power when the
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for five minutes.
Approximately 30 seconds before the
camcorder shuts off, the message
“ AUTO POWER OFF” will appear.
6SEC.DATE
DATA CODE
( 55)
LANGUAGE
( 26)
DEMO MODE
WL.REMOTE
BEEP
POWER SAVE