Filter
Top Products
Connecting to a TV or VCR
66
the tape. If you attempt to record from such
tape via the HDV/DV terminal,
“COPYRIGHT PROTECTED DUBBING
RESTRICTED” appears and you will not be
able to record the contents of the tape.
Audio Dubbing
You can add sound to a recording using the
built-in microphone.
only: You can also record
additional sound from external audio
devices.
Connecting an External Audio Device
Connect the external audio device (CD
player, etc.) to the camcorder using
connection type ( 63). Connect only the
audio plugs (red and white) of the STV-250N
Stereo Video Cable and leave the yellow
video plug unconnected.
Refer also to the instruction manual of the
connected device.
T
O
S
ELECT
THE
A
UDIO
S
OURCE
Options
Default value
Dubbing
POINTS TO CHECK
You can only dub audio on tapes recorded in
SD mode with [ 12bit] audio. This function
is operated with the wireless controller.
1 Locate the scene you wish to start
audio dubbing.
Before locating the starting point, you
can also set the zero set memory
( 33) at the point where you want
the audio dubbing to end. The
camcorder will automatically stop
audio dubbing at that point.
2 Press .
3 Press .
“AUDIO DUB.” and appear.
(10)
[ AUDIO IN]
Dub audio from an external analog device.
[ MIC.IN]
Dub audio using the built-in microphone.
FUNC.
( 24)
1
MENU
AUDIO SETUP
AUDIO DUB.
Desired option
( 10)
FUNC.
FUNC.
REW
PLAY
FF
STOP
PAUSE
SLOW
AUDIO DUB.
ZERO SET
MEMORY
TV SCREEN
STOP
PAUSE
AUDIO DUB.
PAUSE
AUDIO DUB.