Filter
Top Products
Video
40
- Recording movies under fluorescent lights:
If the screen starts to flicker, select
[ PROGRAM AE] and set the shutter
speed to 1/100.
- The shutter speed resets to [ AUTO]
when you set the mode switch to
or change the recording program.
LCD Video Light
You can use the LCD video light to
record in completely dark places. For a
brighter picture, we recommend
keeping a distance of about 20 cm -
60 cm (8 in. - 2 ft.) from the subject
and/or using the [
NIGHT] recording
program. When you activate the LCD
video light, rotate the LCD panel to face
the subject and use the viewfinder
instead ( 30).
[ LCD LIGHT OFF]
[ LCD LIGHT ON]
Press ( )
• The LCD display turns entirely
white when used as the video light.
Use the viewfinder instead.
• Using the viewfinder, select
[ LCD LIGHT OFF] to turn the
LCD video light off.
Self Timer
POINTS TO CHECK
Set the camcorder to record pause
mode.
1 Activate the self timer.
[ MENU]
[ CAMERA SETUP]
[SELF TIMER] [ ON]
2 Press to close the menu.
• appears.
• Set [SELF TIMER] to [ OFF] to
cancel the self timer.
3 Press on the camcorder
to start recording.
• The camcorder starts recording
video after a 10-second
countdown. The countdown
appears on the screen.
• You can also press
on the wireless
controller. In that case, the
countdown will be only 2 seconds.
NOTES
Once the countdown has begun, you can
press again or turn off the
camcorder to cancel the self timer.
( 21)
FUNC.
( 22)
FUNC.
(21)
FUNC.
( 22)
FUNC.
FUNC.
Start/Stop
START/STOP
Start/Stop
COPY